UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications Bi-Directional Video & Data Products MODEL LP320
 
Previous Go to Table of Contents Next
 

MODEL LP320

2 - 8 channels of bi-directional video/stereo (Digital on fiber)

DESCRIPTION

Model LP320The 320 (322/324/328) Series is a high performance Bi-directional Fiber Optic Video/ Audio and optional Data Transmission System. It provides simultaneous transmission of two, four or eight baseband digitized video channels, stereo audio (balanced or unbalanced) and RS232 or RS422 data channels over a pair of optical fiber. It supports 850nm or 13OOnm multimode operations and 13OOnm or 1550 singlemode operations. The 320 Series offers reliable performance at distances up to 50km for singlemode operations with DFB lasers, and up to 1 km for Multimode operations. The 320 Series provides BNC connectors for video Ports, terminal block type connector for the audio ports and DB9 connector for data ports. Standard optical connectors are ST type for multimode and FC-type for singlemode. The power, optical link and channel activities can be monitored by front panel LED indicators. The units are contained in I .71" high x 17.03" wide x 12.0"deep (four channel) or 3.46" high x 17.03" wide x 12.00" deep (eight channel) modules.

FEATURES

  • Digital Video/Audio/Data Communications.
  • Support Multimode or Singlemode Operations.
  • Configured for two (322), four (324) or eight (328) channels
  • Video and Audio over a pair of optical fibers
  • Data may be included over the same pair of optical fibers
  • Optionally available over a single optical fiber

APPLICATIONS

  • Multimedia Conferencing.
  • Remote Monitoring
  • Distance Learning
SYSTEM SPECIFICATIONS
Video (NTSC or PAL)
  Channel Capacity 2, 4 or 8 channels
  Bandwidth (-3dB) 10 MHz
  Signal Level 1.0 Vp-p at 75 ohms
  Differential Gain Range 2 - 4%
  Differential Phase Range 0.7° - 1.3°
  SNR (weighted) 58 - 65 dB
  Connector BNC (75 ohms)
Stereo Audio
  Channel Capacity 2, 4 or 8 channels
  Bandwidth 20 Hz to 20 KHz (3 dB)
  Audio Level ±2.5 Vp-p at 600 ohms
  Input Impedance 100K Ohms (Balanced)
50K Ohms (Unbalanced)
  Output Impedance 90 - 110 Ohms (Balanced)
45 - 55 Ohms (Unbalanced)
  SNR (weighted) >70 dB
  Connector Terminal Block
Optical
  Fiber Type Multimode or Singlemode
  Number of Fibers One pair
  Data Rate 150 Mbps per channel
Up to 1.2Gbps for 8 channels
  Operation Wavelength 850nm or 1310 nm
  Optical Source LED or Laser Diode
  Optical Loss Budget 10 dB (Multimode)
15 dB (Singlemode)
  Connector Type FC (Singlemode)
ST (Multimode)
Physical Parameters
  Dimensions (Approx.) 1.71"(H) x 17.03"(W) x 12.0"(D) (4 channels)
3.46"(H) x 17.03"(W) x 12.0"(D) (8 channels)
  Operating Temperature 0° to 50°C
  Humidity < 95% R.H., Non-condensing
  Power Requirements 90 to 249VAC, 90Watts
  Status Indicators Power On, Optical Link, Channel Activity
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment