UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications RGB Video Fiber Optic Modems MODEL LM9000
 
Previous Go to Table of Contents Next
 

MODEL LM9000

High Resolution RGB Video System

DESCRIPTION

LM9000 fiber optic high-resolution system is designed to transmit RGB signals up to 1200 X1600 resolution via optical fibers. This system uses three independent fibers for each color and it can be installed as a standalone module or a rack mount card. The units operate with Sync on green or with Sync on all three colors. These systems are capable up to a maximum of 128 KHz of horizontal frequency 120 KHz of refresh rate. The Link budget on the multimode system is 10 dB. The reliable, low cost implementation, long distance transmission LM9000 is a state of the art alternative to coaxial systems. The 9000's capabilities are enhanced by it's compatibility with Lascomm's PC based SpectraSmart™ Network Management and Diagnostic software system. SpectraSmart™ supervises the operating parameters of the transmission system such as status on video levels, sync, voltage, temperature, optical levels, etc., and external equipment which are attached to the Lascomm equipment. See the SpectraSmart™ brochure for more details.

MODEL LM9000 

FEATURES

  • Surface Mount Technology (SMT) for High
    Reliability and Repeatability
  • Hot Swappable Cards
  • ST™ Optical Connector
  • 160 MHz Video Bandwidth
  • True DC Restoration
  • SpectraSmart™ Compatible
  • Sync on Green or All Channels
  • 10 dB Budget on 62.5/125u Fiber
  • Compatible with All NTSC, PAL, or SECAM
    Systems
  • Automatically Resettable Solid-State Current Limiters on All Power Lines: Provides Equipment Protection
  • Wide Optical Dynamic Range: Optical
    Attenuators are Never Required
  • BNC Video Connector

CONFIGURATIONS

LM9000 RGB transmitters are installed in rack mountable 14 slot subracks with dual redundant or 18 slot subracks with single power supplies at computer source. Three fibers connect transmitters to receivers which plug into the desk chassis at the remote monitor location. LM9000 require no user adjustments as a result of superior AGC and dynamic range circuit design. Supports 50 and 62.5/125u fibers.

APPLICATIONS

  • CAD/CAM/CAE
  • Trading Floors
  • Medical Imaging
  • HDTV/Plasma Screens

LM9000 application

SPECIFICATIONS

Video
 

Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Max. Horizontal Freq..............................
Max. Refresh Rate.................................

NTSC, PAL, SECAM
0.7 Vp-p, 75 Ohm, 1.0 Vp-p max.
10 Hz to 160 MHz @ -3 dB
<2% typical
<2° typical
52 dB weighted*
128 kHz
120 kHz

* As per RS-250C, measured @ 1Km (multimode)
Connectors
 

Video...................................................
Optical.................................................
Power (Module)......................................

75 Ohm BNC (Gold Center Pin)
ST™, FC
2 Pin Terminal Block

Power**

 

Transmitter Card....................................
Reciever Card........................................
Transmitter Module................................
Reciever Module....................................
Adapter for SR-500/S.............................

3.8 W
4 W
170 mA@ 24 VAC
160 mA@ 24 VAC
Model WP-24

** Due to variations of drivers and diagnostic options, power shown at maximum measurements

Indicators (LEDs)

 

Red.....................................................

Power On

Physical

 

Dimensions:
Module (w/SR-500)...............................
..........................................................
Card....................................................
..........................................................
Weight:
Module (w/SR-500)...............................
Card...................................................
Number of Rack Slots............................


182 mm (7.16") L, 132 mm (5.21") W
29 mm (1.15") H
160 mm (6.3") L, (0.8") W
100 mm (4") H

900 g (32 oz.)
450 g (16 oz.)
One

Enviromental

 

Operating Temperature..........................
Storage Temperature.............................
Relative Humidity..................................

-20°C to +50°C
-50°C to +85°C
0 to 95% Non-condensing

Quality

 

MTBF...................................................
..........................................................

>160,000 hours @ Ground Fix
35°C per MIL217F

Optical

 
Fiber Type/Size
(um)
Optical Output
(dBm)
Reciever Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
Multimode* (SLED)            
50/125 -13 -20 7 850 ST 10
62.5/125 -10 -20 10 850 ST 10
* Distance is limited to fiber loss, splices and fiber bandwidth
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment