| |
Fiber Optic Video Communications 
Bi-Directional Video + Audio Products
MODEL LM2600 |
 |
| |
| |
| |
| MODEL
LM2600 |
2 Channel Video Mux with 2 Duplex Audio or Data Channels |
|
| DESCRIPTION
The 2600i is a reliable, cost effective,
state-of-the-art, one fiber video and data
or audio transmission system. The 2600i
is frequency Modulated/Frequency Division
Multiplexed (FM/FDM) for superior performance,
thus eliminating cross talk on adjacent
channels. This fiber optic system transmits
two channels of real-time video signals
and two duplex channels of data and/or audio,
over one fiber. Multimode or singlemode
versions are available. The 2600i accepts
in PAL, SECAM, and NTSC formats. B&W
or Color signals are seamlessly transmitted
distances of up to 6Km (multi-mode) and
80 km (singlemode). The 2600i capabilities
are enhanced by it's compatibility with
Lascomm's PC based SpectraSmart™,
Network Management and Remote Diagnostic
Software System. SpectraSmart™ supervises
the operating parameters of the transmission
system such as status on video levels, sync,
FM carrier detect, voltage, temperature,
optical levels, etc., and external equipment
which are attached to the Lascomm equipment.
See the SpectraSmart™ brochure for
more details. |
 |
|
| FEATURES
- SpectraSmart™ Network Management Compatible
- Surface Mount technology (SMT) for High Reliability
and Repeatability
- Hot-swappable Rack Cards
- FM/FDM Design
- Transmits Two Real-Time Video Signals
- ST™, FC Optical Connector
- 7 MHz Video Bandwidth per Individual Channel
- 10 Hz to 20 KHz Audio Bandwidth
- DC to 300 Kb/s Data Rate
- Requires No In-field Electrical or Optical
Adjustments
- Meets EIARS-170, RS-343A
- Meets NEMATS1/TS2 and Caltrans specifications
- Utilizes Internal Switching Power Supplies
- Meets RS-250C Transmission Requirements
- NTSC, PAL, SECAM Compatible
- LED Status Indicators Provide Rapid Indication
of Critical Operating Parameters
- Automatic Resettable, Solid-State Current
Limiters on All Power Lines: Provides Equipment
Protection
- Wide Optical Dynamic Range: Optical Attenuators
are Never Required
- BNC Video Connector
- DB Style Connector for Data and/or Audio
|
CONFIGURATIONS
The 2600i product family is available as rack
mount cards that can be installed in all of Lascomm's
card chassis, desk chaises and 19" racking
frames. This system can be configured in either
star (module to rack) ortrunking (rack to rack)
configurations. These products require no user
adjustments & features superior quality and
performance.
APPLICATIONS
- Security and Surveillance
- Intelligent Transportation System (ITS)
- Access Control Systems
- Campus Lecture Networks
|
SPECIFICATIONS |
 |
Video |
| |
|
Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Return Loss...........................................
Field Tilt................................................
Highest Carrier Frequency........................ |
NTSC, PAL, SECAM
1 Vp-p, 75 Ohm, 1.5 Vp-p
max.
5 Hz to 7 MHz @ -3 dB
<2% typical
<1.5° typical
60 dB weighted*
>30 dB
<0.5% max.
75 MHz |
* As per RS-250C, measured @ 1Km
(multimode), @ 10Km (singlemode) |
|
Audio |
| |
|
I/O Impedance......................................
...........................................................
I/O Level..............................................
Frequency Response...............................
THD......................................................
SNR...................................................... |
600 Ohm, 10 kOhm, 47
kOhm
Balanced/Unbalanced
-6 to +6 dBm
10 Hz to 20 KHz
<1%, 1 KHz @ max modulation
>60 dB (weighted)* |
* As per RS-250C, measured @ 1Km
(multimode), @ 10Km (singlemode) |
|
Data |
| |
|
Formats................................................
...........................................................
...........................................................
...........................................................
Rate.....................................................
Bit Error Rate.........................................
|
RS-232D, RS-422A, GenLock,
RS-485 2w/4w, Manchester,
Biphase, 4-20mA Current
Loop,
TTL, Contact Closure,Sensornet
DC to 300 Kb/s
10-9* |
* As per RS-250C, measured @ 1Km
(multimode), @ 10Km (singlemode) |
|
Connectors |
| |
|
Video...................................................
Audio..................................................
Data...................................................
Optical.................................................
Power..................................................
|
75 Ohm BNC (Gold Center
Pin)
DE-15 Female
DE-15 Female
ST™, FC
5 Pin Male DIN |
|
|
Power**
|
| |
|
Reciever Card........................................
Reciever Module....................................
Transmitter Card....................................
Transmitter Module................................
Adapter for SR-1000............................... |
5.64
W
235 mA @ 24 VAC
6.7 W
280 mA @ 24 VAC
Model PS-100 |
** Due to variations of drivers
and diagnostic options, power
shown at maximum measurements |
|
Indicators (LEDs)
|
| |
|
Red.....................................................
Green..................................................
|
Power
On
Audio Level Set or Data
Activity |
|
|
Physical
|
| |
|
Dimensions:
Module (w/SR-1000)..............................
..........................................................
Card....................................................
..........................................................
Weight:
Module (w/SR-1000)..............................
Card...................................................
Number of Rack Slots............................
|
182 mm (7.16") L,
165 mm (6.5") W
44 mm (1.75") H
160mm (6.3") L, 40mm
(1.7") W
100 mm (4") H
1350 g (48 oz.)
675 g (24 oz.)
Two
|
|
|
Enviromental
|
| |
|
Operating Temperature..........................
Storage Temperature.............................
Relative Humidity.................................. |
-40°C
to +74°C
-55°C to +85°C
0 to 95% Non-condensing |
|
|
Quality |
| |
|
MTBF...................................................
.......................................................... |
>175,000
hours @ Ground Fix
35°C per MIL217F |
|
|
Optical
|
| |
Fiber Type/Size
(um) |
Optical Output
(dBm) |
Reciever Sensitivity
(dBm) |
Optical Budget
(dB) |
Wavelength
(nm) |
Optical
Connector |
Optical Dynamic
Range (dB) |
| Multimode* (SLED) |
|
|
|
|
|
|
| 62.5/125 |
-13 |
-34 |
21** |
850 |
ST |
39 |
| 62.5/125 |
-16 |
-34 |
18** |
1300 |
ST |
39 |
| 62.5/125 |
-15/-18 |
-33/-33 |
15** |
850/1300 |
ST |
39 |
| Singlemode (Laser) |
|
|
|
|
|
|
| 9/125 |
-7*** |
-36 |
29 |
1310 |
ST,FC |
41 |
| 9/125 |
-10*** |
-36 |
26 |
1550 |
ST,FC |
41 |
| 9/125 |
-10/-10 |
-34 |
24 |
1310/1550 |
ST,FC |
41 |
* Distance is limited to fiber
loss, splices and fiber bandwidth
** For 50/125μm fiber, subtract
3dB
*** Higher output lasers available |
|
|
| |
|
|
