UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications Unidirectional Video Products MODEL LM2000
 
Previous Go to Table of Contents Next
 

MODEL LM2000

2 Channel Video Mux

DESCRIPTION

The 2000i is a reliable, cost effective, state-of-the-art, one fiber single wavelength video transmission system. The 2000i is frequency Modulated/Frequency Division Multiplexed (FM/FDM) for superior performance. This system is designed to eliminate cross talk on adjacent channels. This fiber optic system transmits two channels of real-time video signals over one fiber. The 2000i accepts PAL, SECAM, and NTSC formats. B&W or Color signals are seamlessly transmitted distances of up to 5Km (multimode) and 80 km (singlemode). The 2000i capabilities are enhanced by it's compatibility with Lascomm's PC based SpectraSmart™, Network Management and Remote Diagnostic Software System. SpectraSmart™ supervises the operating parameters of the transmission system such as status on video levels, sync, FM carrier detect, voltage, temperature, optical levels, etc., and external equipment which are attached to the Lascomm equipment. See the SpectraSmart™ brochure for more details.

MODEL LM2000 

FEATURES

  • SpectraSmart™ Network Management Compatible
  • Surface Mount technology (SMT) for High Reliability and Repeatability
  • Hot-swappable Rack Cards
  • FM/FDM Design
  • Transmits Two Real-Time Video Signals
  • ST™, FC Optical Connector
  • 7 MHz Video Bandwidth per Individual Channel
  • Requires No In-field Electrical or Optical Adjustments
  • Meets EIARS-170, RS-343A
  • Meets NEMATS1 /TS2 and Caltrans specifications
  • Utilizes Internal Switching Power Supplies
  • Meets RS-250C Transmission Requirements
  • NTSC, PAL, SECAM Compatible
  • Automatic Resettable, Solid-State Current Limiters on All Power Lines: Provides Equipment Protection
  • Wide Optical Dynamic Range: Optical Attenuators are Never Required
  • BNC Video Connector

CONFIGURATIONS

The 2000i product family is available as rack mount cards that can be installed in all of Lascomm's card chassis, desk chaises and 19" racking frames. This system can be configured in either star (module to rack) ortrunking (rack to rack) configurations. These products require no user adjustments & features superior quality and performance.

APPLICATIONS

  • Security and Surveillance
  • Intelligent Transportation System (ITS)
  • Access Control Systems
  • Campus Lecture Networks

LM2000 application

SPECIFICATIONS

Video
 

Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Return Loss...........................................
Field Tilt................................................
Highest Carrier Frequency........................

NTSC, PAL, SECAM
1 Vp-p, 75 Ohm, 1.5 Vp-p max.
5 Hz to 7 MHz @ -3 dB
<2% typical
<1.5° typical
60 dB weighted*
>30 dB
<0.5% max.
75 MHz

* As per RS-250C, measured @ 1Km (multimode), @ 10Km (singlemode)
Connectors
 

Video...................................................
Optical.................................................
Power..................................................

75 Ohm BNC (Gold Center Pin)
ST™, FC
2 pin Terminal Block

Power**

 

Reciever Card........................................
Reciever Module....................................
Transmitter Card....................................
Transmitter Module................................
Adapter for SR-500/S..............................

3.3 W
138 mA @ 24 VAC
2.4 W
100 mA @ 24 VAC
Model WP-24

** Due to variations of drivers and diagnostic options, power shown at maximum measurements

Indicators (LEDs)

 

Red.....................................................

Power On

Physical

 

Dimensions:
Module (w/SR-500/S).............................
..........................................................
Card....................................................
..........................................................
Weight:
Module (w/SR-500)...............................
Card...................................................
Number of Rack Slots............................


182 mm (7.16") L, 132 mm (5.21")W
29 mm (1.15") H
160 mm (6.3") L, 20 mm (0.8") W
100 mm (4") H

900 g (32 oz.)
450 g (16 oz.)
One

Enviromental

 

Operating Temperature..........................
Storage Temperature.............................
Relative Humidity..................................

-40°C to +74°C
-55°C to +85°C
0 to 95% Non-condensing

Quality

 

MTBF...................................................
..........................................................

>190,000 hours @ Ground Fix
35°C per MIL217F

Optical

 
Fiber Type/Size
(um)
Optical Output
(dBm)
Reciever Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
Multimode* (Laser)            
62.5/125 -7 -24 17** 850 ST 39
62.5/125 -16 -24 18** 1300 ST 39
Singlemode (Laser)            
9/125 -7*** -26 19 1310 ST,FC 41
9/125 -10*** -26 16 1550 ST,FC 41
* Distance is limited to fiber loss, splices and fiber bandwidth
** For 50/125μm fiber, subtract 3dB
*** Higher output lasers available
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment