UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications Unidirectional Video Products MODEL LM195
 
Previous Go to Table of Contents Next
 

MODEL LM195

3 Channel 30MHz FM Video System over 3 fibers

DESCRIPTION

The LM195 is a Frequency (FM) Modulated fiber optic video system that transmits and receives three real time 30 Mhz video signals over three multimode fibers. PAL, SECAM and NTSC formats in B&W or color are seamlessly transmitted distances of 3Km (multimode) and 100Km (singlemode). The 195's capabilities are enhanced by it's compatibility with Lascomm's PC based SpectraSmart Network Management and Diagnostic software system. SpectraSmart™ supervises the operating parameters of the transmission system such as status on video levels, sync, voltage, temperature, FM Carrier Detect, optical levels, etc., and external equipment which are attached to the Lascomm equipment. See the SpectraSmart™ brochure for more details.

MODEL LM195 

FEATURES

  • Surface Mount Technology (SMT) for High
    Reliability and Repeatability
  • Hot Swappable Cards
  • ST™,FC Optical Connector 30MHz Video
  • Bandwidth Meets EIARS-170, RS-343A
  • SpectraSmart™ Compatible Independent
  • Power Supplies @ Channel Meets RS-250C
  • Transmission Requirements Compatible with all NTSC, PAL, orSECAM Systems
  • Automatically Resettable Solid-State Current Limiters on All Power Lines: Provides Equipment Protection
  • Wide Optical Dynamic Range: Optical Attenuators are Never Required
  • BNC Video Connector

CONFIGURATIONS

The LM195 is available as a rack mount card that can be installed in all of Lascomm's card chassis, desk chassis and 19" racking frames. The LM195 can be converted to a module by installing it in the SR-500 card chassis. This system can be configured in either star (module to rack) ortrunking (rack to rack) configurations. LM195 is compatible with single channel, LM145 units. This product requires no user adjustments and features superior quality and performance.

APPLICATIONS

  • Security and Surveillance
  • Military Communications
  • Intelligent Transportation System (ITS)
  • Radar

LM195 application

SPECIFICATIONS

Video
 

Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Return Loss...........................................
Field Tilt................................................
Carrier Frequency...................................

NTSC, PAL, SECAM
1 Vp-p, 75 Ohm, 1.5 Vp-p max.
5 Hz to 30 MHz @ -3 dB
<2% typical
<2° typical
64 dB weighted*
>30 dB
<0.5% max.
150 MHz

* As per RS-250C, measured @ 1Km (multimode)
Connectors
 

Video...................................................
Optical.................................................
Power..................................................

75 Ohm BNC (Gold Center Pin)
ST™, FC
2 Pin Terminal Block

Power**

 

Card...................................................
Module................................................
Adapter for SR-500/S............................

3 W
120mA@24VAC
Model WP-24

** Due to variations of drivers and diagnostic options power shown at maximum measurements

Indicators (LEDs)

 

Red.....................................................

Power On

Physical

 

Dimensions:
Module (w/SR-500)................................
..........................................................
Card....................................................
..........................................................
Weight:
Module (w/SR-500)................................
Card...................................................
Number of Rack Slots............................


181 mm(7.15")L,24mm(.95")W
132mm(5.20")H
160 mm (6.3") L, 20 mm (0.8") W
100mm (4") H

900 g (32 oz.)
450 g (16 oz.)
One

Enviromental

 

Operating Temperature..........................
Storage Temperature.............................
Relative Humidity..................................

-40°C to +60°C
-55°C to +85°C
0 to 95% Non-condensing

Quality

 

MTBF...................................................
..........................................................

>165,000 hours @ Ground Fix
35°C per MIL217F

Optical

 
Fiber Type/Size
(um)
Optical Output
(dBm)
Reciever Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
Multimode* (SLED)            
50/125 -18 -36 18 850 ST 34
50/125 -20 -36 16 1300 ST 34
62.5/125 -15 -36 21 850 ST 34
62.5/125 -17 -36 19 1300 ST 34
* Distance is limited to fiber loss, splices
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment