UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications Unidirectional Video Products MODEL LM190
 
Previous Go to Table of Contents Next
 

MODEL LM190

3 Channel FM Video System over 3 fibers

DESCRIPTION

The LM190 is a Frequency Modulated (FM) fiber optic video system that transmits and receives three real time video signals over three multi-mode or singlemode fibers. PAL, SECAM and NTSC formats in B&W or color are seamlessly transmitted distances of 6Km (multimode) and 10OKm (singlemode). The 190's capabilities are enhanced by it's compatibility with Lascomm's PC based SpectraSmart Network Management and Diagnostic software system. SpectraSmart™ supervises the operating parameters of the transmission system such as status on video levels, sync, FM carrier detect, voltage, temperature, optical levels, etc., and external equipment which are attached to the Lascomm equipment. See the SpectraSmart™ brochure for more details.

MODEL LM190 

FEATURES

  • Surface Mount Technology (SMT) for High
    Reliability and Repeatability
  • Hot Swappable Cards
  • ST™,FC Optical Connector
  • 10MHz Video Bandwidth
  • Meets EIARS-170, RS-343A
  • SpectraSmart™ Compatible
  • Meets NEMATS1 fTS2 and Caltrans Specifications
  • Utilizes Internal Switching Power Supplies
  • Meets RS-250C Transmission Requirements
  • Compatible with All NTSC, PAL, or SECAM
    Systems
  • Automatically Resettable Solid-State Current Limiters on All Power Lines: Provides Equipment Protection
  • Wide Optical Dynamic Range: Optical Attenuators are Never Required
  • BNC Video Connector

CONFIGURATIONS

The LM190 is available as a rack mount card that can be installed in all of Lascomm's card chassis, desk chassis and 19" racking frames. LM190 are compatable with LM140 Single Channel Systems. The LM190 can be converted to a module by installing it in the SR-500 card chassis. This system can be configured in either star (module to rack) or trunking (rack to rack) configurations and can accommodate up to 54 transmitters or receivers in a 19" chassis for high density applications. This product requires no user adjustments and features superior quality and performance.

APPLICATIONS

  • Security and Surveillance
  • Military Communications
  • Intelligent Transportation System (ITS)

LM190 application

SPECIFICATIONS

Video
 

Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Return Loss...........................................
Field Tilt................................................
Carrier Frequency...................................

NTSC, PAL, SECAM
1 Vp-p, 75 Ohm, 1.5 Vp-p max.
5 Hz to 10 MHz @ -3 dB
<2% typical
<1.5° typical
66 dB weighted*
>30 dB
<0.5% max.
70 MHz

* As per RS-250C, measured @ 1Km (multimode), @ 10Km (singlemode)
Connectors
 

Video...................................................
Optical.................................................
Power..................................................

75 Ohm BNC (Gold Center Pin)
ST™, FC
2 Pin Terminal Block

Power**

 

Card...................................................
Module................................................
Adapter for SR-500/S............................

3 W
120mA@24VAC
Model WP-24

** Due to variations of drivers and diagnostic options power shown at maximum measurements

Indicators (LEDs)

 

Red.....................................................

Power On

Physical

 

Dimensions:
Module (w/SR-500)................................
..........................................................
Card....................................................
..........................................................
Weight:
Module (w/SR-500)................................
Card...................................................
Number of Rack Slots............................


182 mm (7.16") L, 132mm(5.21")W
29 mm (1.15") H
160 mm (6.3") L, (0.8") W
10 mm (4") H

900 g (32 oz.)
450 g (16 oz.)
One

Enviromental

 

Operating Temperature..........................
Storage Temperature.............................
Relative Humidity..................................

-40°C to +74°C
-55°C to +85°C
0 to 95% Non-condensing

Quality

 

MTBF...................................................
..........................................................

>175,000 hours @ Ground Fix
35°C per MIL217F

Optical

 
Fiber Type/Size
(um)
Optical Output
(dBm)
Reciever Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
Multimode* (SLED)            
62.5/125 -13 -34 21** 850 ST 39
62.5/125 -16 -34 18** 1300 ST 39
Singlemode (Laser)            
9/125 -7*** -36 28 1310 ST,FC 41
9/125 -10*** -36 26 1550 ST,FC 41
* Distance is limited to fiber loss, splices and fiber bandwidth
** For 50/125μm fiber, subtract 3dB
*** Higher output lasers available
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment