UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications Unidirectional Video Products MODEL LM140
 
Previous Go to Table of Contents Next
 

MODEL LM140

1 Channel FM Video System

DESCRIPTION

The LM140 is a Frequency Modulated (FM) state-of-the-art fiber optic video system that transmits and receives a real time video signal over one multimode or singlemode fiber. PAL, SECAM or NTSC formats, in B&W or color, are seamlessly transmitted distances of up to 6Km (multimode) and 100 Km (singlemode). All Lascomm products requires no user adjustments & features superior quality and performance. The capabilities of the Model 140 are enhanced by it's compatibility with Lascomm's PC based SpectraSmart™ Network Management and Diagnostic software system. See the SpectraSmart™ brochure for more details.

MODEL LM140 

FEATURES

  • Surface Mount Technology (SMT) for High Reliability and Repeatability
  • Compact Modules and Card Units
  • Laser Based Back-Biased Photo Detection Circuitry for Stable Optical Output Over Full Temperature Range (Singlemode)
  • 10MHz Video Bandwidth
  • Meets EIARS-170, RS-343A
  • Frequency Modulated (FM) Transmission
  • Input Voltage Range: 12VDC-35VDC, 9VAC-24VAC (Modules)
  • SpectraSmart™ Compatible
  • Meets NEMATS1 fTS2 and Caltrans Specifications
  • Utilizes Internal Switching Power Supplies
  • Meets RS-250C Transmission Requirements
  • Compatible with All NTSC, PAL, or SECAM Systems
  • LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
  • Automatically Resettable Solid-State Current Limiters on All Power Lines: Provides Equipment Protection
  • Wide Optical Dynamic Range: Optical Attenuators are Never Required

CONFIGURATIONS

The 140 product family is available in both stand-alone modules and rack mount cards. The cards can be installed in all of Lascomm's card chassis, desk chassis and 19" racking frames. This system can be configured in either star (module to rack) ortrunking (rack to rack) configurations. The LM140 is compatible with the LM190 triple transmitter and receiver cards for high-density applications.

APPLICATIONS

  • Security and Surveillance
  • Military Communications
  • Intelligent Transportation System (ITS)

LM140 application

SPECIFICATIONS

Video
 

Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Return Loss...........................................
Field Tilt................................................
Carrier Frequency...................................

NTSC, PAL, SECAM
1 Vp-p, 75 Ohm, 1.5 Vp-p max.
5 Hz to 10 MHz @ -3 dB
<2% typical
<1.5° typical
67 dB weighted*
>30 dB
<0.5% max.
70 MHz

* As per RS-250C, measured @ 1Km (multimode), @ 10Km (singlemode)
Connectors
 

Video...................................................
Optical.................................................
Power..................................................

75 Ohm BNC (Gold Center Pin)
ST™, FC
2 Pin Terminal Block

Power**

 

Transmitter Card..................................
Transmitter Module..............................
Reciever Card......................................
Reciever Module..................................

2 W
80 mA @ 24 VAC
2 W
90 mA @ 24 VAC

** Due to variations of drivers and diagnostic options power shown at maximum measurements

Indicator

 

Module (Bi-Color LED):
Green..................................................
Red.....................................................
Off......................................................
Card (LED):
Red.....................................................


Video Sync Present
Video Sync Absent
Absence of Power

Power On

Physical

 

Dimensions:
Module***...........................................
..........................................................
Card....................................................
..........................................................
Weight:
Module................................................
Card...................................................
Number of Rack Slots............................


90 mm (3.5")L, 60 mm (2.3")W
25 mm (1")H
160 mm (6.3")L, 20 mm (0.8")W
100 mm (4")H

858 g (3 oz.)
450 g (16 oz.)
One

*** Add 30mm to include mounting flanges

Enviromental

 

Operating Temperature..........................
Storage Temperature.............................
Relative Humidity..................................

-40°C to +74°C
-55°C to +85°C
0 to 95% Non-condensing

Quality

 

MTBF...................................................
..........................................................

>290,000 hours @ Ground Fix
35°C per MIL217F

Optical

 
Fiber Type/Size
(um)
Optical Output
(dBm)
Reciever Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
Multimode* (SLED)            
62.5/125 -13 -33 20** 850 ST 39
62.5/125 -16 -33 17** 1300 ST 39
Singlemode (Laser)            
9/125 -7*** -35 28 1310 ST,FC 41
9/125 -10*** -35 25 1550 ST,FC 41
* Distance is limited to fiber loss, splices and fiber bandwidth
** For 50/125μm fiber, subtract 3dB
*** Higher output lasers available
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment