UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications Unidirectional Video Products MODEL LM130
 
Previous Go to Table of Contents Next
 

MODEL LM130

3 Channel IM Video System over 3 fibers

DESCRIPTION

The LM130 is a Intensity Modulated (IM) fiber optic video system that transmits and receives three real time video signals over three multimode fibers. PAL, SECAM and NTSC formats in B&W or color are seamlessly transmitted distances of 8Km (multimode). The 130's capabilities are enhanced by it's compatibility with Lascomm's PC based SpectraSmart Network Management and Diagnostic software system. SpectraSmart™ supervises the operating parameters of the transmission system such as status on video levels, sync, voltage, temperature, optical levels, etc., and external equipment which are attached to the Lascomm equipment. See the SpectraSmart™ brochure for more details.

MODEL LM130

FEATURES

  • Surface Mount Technology (SMT) for High
    Reliability and Repeatability
  • Hot Swappable Cards
  • ST™ Optical Connector
  • 15 MHz Video Bandwidth
  • Meets EIARS-170, RS-343A
  • SpectraSmart™ Compatible
  • Independent Power Supplies @ Channel
  • Meets RS-250C Transmission Requirements
  • Compatible with All NTSC, PAL, or SECAM
    Systems
  • Automatically Resettable Solid-State Current Limiters on All Power Lines: Provides Equipment Protection
  • Wide Optical Dynamic Range: Optical
    Attenuators are Never Required
  • BNC Video Connector

CONFIGURATIONS

The LM130 is available as a rack mount card that can be installed in all of Lascomm's card chassis, desk chassis and 19" racking frames. The LM130 can be converted to a module by installing it in the SR-500 card chassis. This system can be configured in either star (module to rack) ortrunking (rack to rack) configurations and can accommodate up to 54 transmitters or receivers in a 19" chassis for high density applications. The LM130 is compatible with LM100, single channel units. This product requires no user adjustments and features superior quality and performance.

APPLICATIONS

  • Security and Surveillance
  • Military Communications
  • Intelligent Transportation System (ITS)

LM130 application

SPECIFICATIONS

Video
 

Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Return Loss...........................................
Field Tilt................................................

NTSC, PAL, SECAM
1Vp-p, 75 Ohm, 1.5Vp-p max.
5 Hz to 15 MHz @ -3 dB
<2% typical
<2° typical
67 dB weighted*
>30 dB
<0.5% max.

* As per RS-250C, measured @ 1Km (multimode)
Connectors
 

Video...................................................
Optical.................................................
Power..................................................

75 Ohm BNC (Gold Center Pin)
ST™, FC
2 Pin Terminal Block

Power**

 

Transmitter Card..................................
Transmitter Module..............................
Reciever Card......................................
Reciever Module..................................
Adapter for SR-500/S...........................

3.8 W
170 mA@ 24 VAC
4 W
160 mA@ 24 VAC
Model WP-24

** Due to variations of drivers and diagnostic options power shown at maximum measurements

Indicators (LEDs)

 

Red.....................................................

Power On

Physical

 

Dimensions:
Module (w/SR-500)................................
..........................................................
Card....................................................
..........................................................
Weight:
Module (w/SR-500)................................
Card...................................................
Number of Rack Slots............................


182 mm (7.16")L, 132 mm (5.21")W
29 mm (1.15")H
160 mm (6.3")L, (0.8")W
10 mm (4")H

900 g (32 oz.)
450 g (16 oz.)
One

Enviromental

 

Operating Temperature..........................
Storage Temperature.............................
Relative Humidity..................................

-30°C to +60°C
-50°C to +85°C
0 to 95% Non-condensing

Quality

 

MTBF...................................................
..........................................................

>160,000 hours @ Ground Fix
35°C per MIL217F

Optical

 
Fiber Type/Size
(um)
Optical Output
(dBm)
Reciever Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
Multimode* (SLED)            
50/125 -18 -44 26 850 ST 29
50/125 -20 -44 24 1300 ST 29
62.5/125 -15 -44 29 850 ST 29
62.5/125 -17 -44 27 1300 ST 29
* Distance is limited to fiber loss and splices
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment