UNIDIRECTIONAL VIDEO FIBER OPTIC MODEMS
BI-DIRECTIONAL VIDEO FIBER OPTIC MODEMS
VIDEO MULTIPLEXERS (UNIDIRECTIONAL AND BI-DIRECTIONAL)
DIGITAL VIDEO FIBER OPTIC MODEMS
RGB VIDEO FIBER OPTIC MODEMS
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Video Communications Unidirectional Video Products MODEL LM100
 
    Go to Table of Contents Next
 

MODEL LM100

1 Channel IM Video System

DESCRIPTION

The LM100 is a Intensity Modulated (IM) state-of-the-art fiber optic video system that transmits and receives real time video signals over one multimode fiber. PAL, SECAM or NTSC formats, in B&W or color, are seamlessly transmitted distances of up to 8Km. The LM100 is compatible with the LM130 triple transmitter and receiver cards for high-density applications. This product requires no user adjustments & features superior quality and performance. The 100's capabilities are enhanced by it's compatibility with Lascomm's PC based SpectraSmart™ Network Management and Diagnostic software system. SpectraSmart™ supervises the operating parameters of the transmission system such as status on video levels, sync, voltage, temperature, optical levels, etc., as well as external equipment which are attached to the Lascomm equipment. See the SpectraSmart™ brochure for more details.

MODEL LM100 

FEATURES

  • Surface Mount Technology (SMT) for High Reliability and Repeatability
  • Compact Modules and Card Units
  • ST™ Optical Connector
  • 15MHz Video Bandwidth
  • Meets EIARS-170, RS-343A
  • 9VAC-24VAC (Modules)
  • Utilizes Internal Switching PowerSupplies
  • Meets RS-250CTransmission Requirements
  • Compatible with All NTSC, PAL, or SECAM Systems
  • LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
  • Automatically Resettable Solid-State Current Limiters on All Power Lines: Provides Equipment Protection
  • Wide Optical Dynamic Range: Optical Attenuators are Never Required
  • BNC Video Connector

CONFIGURATIONS

The 100 product family is available in both stand-alone modules and rack mount cards. The cards can be installed in all of Lascomm's card chassis, desk chassis and 19" racking frames. This system can be configured in either star (module to rack) or trunking (rack to rack) configurations The LM100 is compatible with the LM130 triple transmitter and receiver cards for high-density applications that can accommodate up to 54 transmitters or receivers per 19" chassis.

APPLICATIONS

  • Security and Surveillance
  • Distance Learning

LM100 application

SPECIFICATIONS

Video
 

Format..................................................
Voltage/Impedance................................
Bandwidth.............................................
Differential Gain.....................................
Differential Phase...................................
SNR......................................................
Return Loss...........................................
Field Tilt................................................

NTSC, PAL, SECAM
1 Vp-p, 75 Ohm, 1.5 Vp-p max.
5 Hz to 15 MHz @ -3 dB
<2% typical
<2° typical
67 dB weighted*
>30 dB
<0.5% max.

* As per RS-250C, measured @ 1Km (multimode)
Connectors
 

Video...................................................
Optical.................................................
Power..................................................

75 Ohm BNC (Gold Center Pin)
ST™
2 Pin Terminal Block

Power**

 

Transmitter Card..................................
Transmitter Module..............................
Reciever Card......................................
Reciever Module..................................
Adapter for SR-500/S...........................

1.8 W
80 mA @ 24 VAC
2 W
90 mA @ 24 VAC
Model WP-24

** Due to variations of drivers and diagnostic options power shown at maximum measurements

Indicator

 

Module (Bi-Color LED):
Green..................................................
Red.....................................................
Off......................................................
Card (LED):
Red.....................................................


Video Sync Present
Video Sync Absent
Absence of Power

Power On

Physical

 

Dimensions:
Module***...........................................
..........................................................
Card....................................................
..........................................................
Weight:
Module................................................
Card...................................................
Number of Rack Slots............................


90 mm (3.5")L, 60 mm (2.3")W
25 mm (1")H
160 mm (6.3")L, 20 mm (0.8")W
100 mm (4")H

170 g (6 oz.)
310g(11 oz.)
One

*** Add 30mm to include mounting flanges

Enviromental

 

Operating Temperature..........................
Storage Temperature.............................
Relative Humidity..................................

-30°C to +60°C
-50°C to +85°C
0 to 95% Non-condensing

Quality

 

MTBF...................................................
..........................................................

>230,000 hours @ Ground Fix
35°C per MIL217F

Optical

 
Fiber Type/Size
(um)
Optical Output
(dBm)
Reciever Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
Multimode* (SLED)            
50/125 -18 -44 26 850 ST 29
50/125 -20 -44 24 1300 ST 29
62.5/125 -15 -44 29 850 ST 29
62.5/125 -17 -44 27 1300 ST 29
* Distance is limited to fiber loss and splices
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment