|
Fiber Optic Ethernet Communications  Media Converters MODEL LD3450BD3 |
 |
| |
|
| |
MODEL LD3450BD3 |
100Base-FX To 10/100Base-TX LFP Media Converter |
|
| |
 |
| |
LD3450BD3 |
TECHNICAL SPECIFICATIONS |
- Model:
LD3450SC / LD3450ST / LD3450MT / LD3450VF
LD3450SC20 / LD3450SC60 / LD3450SC100
LD3450BD3.20 / LD3450BD5.20 / LD3450BD3.60 / LD3450BD5.60
- Standard:IEEE 802.3u 100Base-FX/TX, 802.3 10Base-T
- Connectors:RJ-45 (auto MDI/MDI-X) &
1310nm Multi-Mode Duplex-SC for LD3450SC
1310nm Multi-Mode Duplex-ST for LD3450ST
1310nm Multi-Mode MT-RJ for LD3450MT-RJ
1310nm Multi-Mode VF-45 for LD3450VF
1310nm Single-Mode/20km Duplex-SC for LD3450SC20
1310nm Single-Mode/60km Duplex-SC for LD3450SC60
1550nm Single-Mode/100km Duplex-SC for LD3450SC100
1310nm (TX) Single-Mode/20 Simplex-SC for LD3450BD3.20
1550nm (TX) Single-Mode/20 Simplex-SC for LD3450BD5.20
1310nm (TX) Single-Mode/60 Simplex-SC for LD3450BD3.60
1550nm (TX) Single-Mode/60 Simplex-SC for LD3450BD5.60
- dBm [ Min TX, Max TX, Sensitivity, Power Budget ]:
LD3450SC [ -19dBm, -14dBm, -30dBm, 11dB ]
LD3450ST [ -19dBm, -14dBm, -30dBm, 11dB ]
LD3450MT [ -19dBm, -14dBm, -30dBm, 11dB ]
LD3450VF [ n/a ]
LD3450SC20 [ -15dBm, -8dBm, -31dBm, 16dB ]
LD3450SC60 [ -5dBm, 0dBm, -34dBm, 29dB ]
LD3450SC100 [ -6dBm, -4dBm, -36dBm, 30dB ]
LD3450BD3.20 [ -14dBm, -8dBm, -31dBm, 17dB ]
LD3450BD5.20 [ -14dBm, -8dBm, -31dBm, 17dB ]
LD3450BD3.60 [ n/a ]
LD3450BD5.60 [ n/a ]
- Data Transfer Rate:
100Mbps for FX
10 or 100Mbps (auto-negotiation) for TP
10 or 100Mbps (forced) for TP selectable by DIP-Switch (S1-Bit1 & S1-Bit2)
- Duplex Mode:
Full or Half (forced) for FX selectable by DIP-Switch (S1-Bit5)
Full or Half (auto-sense) for TP
Full or Half (forced) for TP selectable by DIP-Switch (S1-Bit3)
- AC Address Table:2K
- Buffer Memory: 384K
- Cables / Max Distance:
Category 5 or above UTP, up to 100m
50/125, 62.5/125, 100/140µm Multi-Mode fiber, up to 2km
8.3/125, 8.7/125, 9/125, 10/125µm Single-Mode, up to
20km for CFM3450SC20/CFM3450BD3.20/CFM3450BD5.20
60km for CFM3450SC60/CFM3450BD3.60/CFM3450BD5.60
100km for CFM3450SC100
- LEDs:
Unit — POWER
FX Port — FX LNK/ACT, FX FDX/COLM
TX Port — TX LNK/ACT, TX 100
- Power Requirement: 1A@+5V DC
- Operating Temperature: 0° to 50° C
- Humidity: 5% to 90%
- Dimensions: 26.2 x 70.3 x 94mm (H x w x D)
- Safety: FCC Class A, CE Mark Approval, RoHS Compliance
|
|
|
ADDITIONAL FEATURES |
- Link Fault Pass-Through (LFP)
LFP function only takes effect as S1-Bit4 is enabled. Disabled S1-Bit4 will turn this media converter into a general one. The LFP function works only when two converters at each end own this capability. Furthermore, both LFP converters should be supplied only by the SAME manufacturer. The connection coming from LFP converter with odd models or non-LFP converter will cease the LFP function.
- USB Self-Powered
With the optional USB cable (sold separately), power can be drawn directly from your desktop or notebook computer's USB port without using an external power adapter.
|
|
|
|
|
|
