COPPER TO FIBER OPTIC ETHERNET SWITCHES
COPPER TO FIBER OPTIC ETHERNET MEDIA CONVERTERS
DATA TO ETHERNET CONVERTERS
COPPER TO FIBER OPTIC GIGABIT ETHERNET MEDIA CONVERTERS
COPPER TO FIBER OPTIC ETHERNET MEDIA CONVERTERS OVER 1 FIBER
FIBER OPTIC SWITCHES
MULTIMODE FIBER TO SINGLEMODE FIBER ETHERNET CONVERTERS & REPEATERS
COPPER TO FIBER OPTIC GIGABIT ETHERNET MEDIA CONVERTERS W/SNMP
CHASSIS FOR STAND ALONE UNITS
HEAVY DUTY, HIGH TEMPERATURE ETHERNET EQUIPMENT
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Ethernet Communications Switches MODELS LD004
 
    Go to Table of Contents Next
 

MODELS LD004C / LD004M / LD004T

4 Port 100Base Multimode Fiber Optic Switch

Model LD004C Model LD004T
LD004C LD004T

OVERVIEW

LD004C : 4-Port 100Base-FX Multi-Mode Ports, SC
LD004M : 4-Port 100Base-FX Multi-Mode Ports, MT-RJ
LD004T : 4-Port 100Base-FX Multi-Mode Ports, ST

LD004FX is a 4-Port Fast Ethernet fiber optics switch that complies with IEEE 802.3u and 802.3x 100Base-FX standards. It is ideal for small workgroup to set up a 100Base-FX network and for 4 distant 100Base-FX networks linking together over fiber optics cable.

LD004C is equipped with SC Tx/Rx connectors while LD004T is equipped with ST Tx/Rx connectors. LD004M is equipped with MT-RJ (Small Form Factor) fiber optics connectors. The maximum cable length can be up to 2 km in full-duplex mode for multi-mode cable. Each port is equipped with Link/Activity, 100Mbps, and Full-Duplex/Collision diagnostic LEDs. Power LED clearly indicates the status of electric power. Each port is switch selectable for either full- or half-duplex.

TECHNICAL SPECIFICATIONS

  • Standard: IEEE 802.3u and 802.3x 100Base-FX
  • Connector:
    LD004C
    4 100Base-FX SC Tx/Rx Multi-Mode connectors
    LD004M
    4 100Base-FX MT-RJ Multi-Mode connectors
    LD004T
    4 100Base-FX ST Tx/Rx Multi-Mode connectors
  • Transmission Mode/Speed: 100Mbps Full- or Half-Duplex
  • Transmission Method: Store and Forward Switching
  • Packet Forwarding/Filtering Rate:
    148,800 packets/sec full wire rate on 100Mbps
  • MAC Address and Self-learning: Up to 12K
  • Buffer Memory: 1,024KB for 4 ports
  • Flow Control:
    IEEE 802.3x compliant for full-duplex
    Back Pressure flow control for half-duplex
  • Cable: 50/125, 62.5/125, or 100/140µm multi-mode, up to 2km
  • LEDs:
    System LED - Power
    Per Port LED - Link/Act, 100Mbps, FDX/Col
  • Power Requirement: 100~240V AC, 50~60Hz
  • Operating Temperature: 0° to 50° C
  • Humidity: 5% to 90%
  • Dimensions: 45 x 330 x 230 mm (H x W x D)
  • FCC Part 15 Class A & CE Mark
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment