FIBER OPTIC MODEMS
FIBER OPTIC MULTIPLEXERS
FIBER OPTIC CONVERTERS
FIBER OPTIC REPEATERS
FIBER OPTIC WDM
FIBER OPTIC SPLITTER
FIBER OPTIC CARD CAGE
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Data Communications Multiplexers MODEL LT8116
 
Previous Go to Table of Contents Next
 

MODEL LT8116

16 Channel Multiple Interface Multiplexer

Model LT8116
  • 16 Async Channels
  • Speeds Up to 38.4 Kbps
  • Power Redundancy & Fiber Optic Redundancy
  • LEDs for "Tx," "Rx," "Alarm" & "PWR"
  • Field Interchangeable Interfaces: RS232, RS-422, Dry Contact Relays
  • Local & Remote Loopback Single Mode & Multimode Rack Mount or Standalone

Applications

The LT8116 provides a particularly inexpensive method for connecting large numbers of async terminals, printers and status collecting devices. It is also used in harsh environments where EMI/RFI interference and lightning conditions may exist.

 

 

Description

The LT8116 is an affordable 16-channel fiber optic multiplexer with interchangeable interfaces and optional power/optical redundancy. It supports data rates up to 38.4Kbps with no controls. Because the electrical interfaces are modular, they are interchangeable in 4-channel increments at any time--before or after installation. Available interfaces include RS-232 or RS-422. Fiber optic connectors are ST (FC or SMA are optional); electrical connectors are RJ11. Power is 9 to 12VDC or 115/230VAC with an external power cube.

Specifications

Data Rates Async up to 38.4 Kbps per channel
Channels Capacity 16 Async Channels
Optical Transmitter LED/ELED
Receiver PIN
Wavelength 850nm/1300nm multimode
1300nm single mode
Fiber Optic connectors *ST (FC or SMA optional)
Loss Budget
15 dB multimode 850nm/1300nm @50 um
15 dB multimode 850nm/1300nm @62.5um
20 dB single mode 1300nm @9 um
Electrical Connector RJ-11
Interface RS-232, RS-422, Dry Contact Relay

(check factory for other kinds)

System Bit error rate 1 in 10X9 or better
Visual indicator "Tx", "Rx", "Alarm", "Sync", "Power
Diagnostic Local Loopback
Power Dure power source 12 VDC @400ma
optional: 115 or 230 VAC with external power cube
Temperature Operating -10"C to 50 C
Storage -40 C to 901'C
Humidity 95% non-condensing
Physical Height (6.5 cm) 2.60"
Width (18 cm) 7.20"
Depth (25 cm) 9.75"
Weight (1 .36 kg) 3 lb
©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment