FIBER OPTIC MODEMS
FIBER OPTIC MULTIPLEXERS
FIBER OPTIC CONVERTERS
FIBER OPTIC REPEATERS
FIBER OPTIC WDM
FIBER OPTIC SPLITTER
FIBER OPTIC CARD CAGE
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Data Communications Audio equipment MODEL LT8000
 
    Go to Table of Contents Next
 

MODEL LT8000

Analog/Intercom Fiber Optic Multiplexer

  • Model LT8000Up to 24 Analog or Intercom Channels
  • Voice Bandwidths from 300Hz to 3.4Khz
  • Push-Button Buzzer for Signaling
  • Multimode or Single Mode (850/1300/1550)
  • Built-In Power Redundancy
  • Optical Redundancy (Optional)
  • Rackmount or Standalone

Applications

The LT8000 is frequently used to link voice communications devices in telecommunications and SCADA environments.  It is also used in harsh environments where ground loops, EMI/RFI interference and lightning conditions may occur.

Model LT8000 application diagram

Description

The LT8000 multiplexes up to 24 channels of Analog or Intercom Signals over single mode or multimode fiber optic cable. It supports voice bandwidths from 300 Hz to 3.4 KHz. The analog interface is for FSK (frequency shift key) applications. It has a 600 ohm isolation audio transformer and supports voltages from 0 to 3 Vpp. The intercom interface is for 4-wire voice communication. It connects to a handset with mouth-and-ear piece.

The LT8000 digitizes the audio signals and converts them to PCM (pulse code modulation). Since the analog and voice signals are digitized, the voice quality does not degrade over extended distances. Distances to 30 km are typical via 1300nm single mode fiber, to 4 km over 850nm multimode fiber.

The LT8000 Fiber Optic Multiplexer is available standalone or rack mount. Standalone versions support up to 24 channels, rack mount support up to 12 channels. RJ-11 ports are provided on the rear side to connect with handsets or customer's audio devices.>

Built-in power redundancy is standard on the LT8000. Optical redundancy is available as an option. Fiber Optical connectors are ST; FC is optional. Electrical connectors are RJ-11. Power is 9 to 12VDC or 115/230VAC with an external power cube.

Specifications

Audio Bandwidth
   Analog...................300Hz to 3.4 KHz
  Intercom..................300Hz to 3.4 KHz

Channel Capacity
   Stand Alone Unit.......4 or 8 Channels
   Rack Mount Unit.......4, 8, 12, 16, 20,
   ................................or 24 Channels

Wavelength
    .........................850nm/1300nm MM
    .......................1300nm/1550nm SM
   Fiber Optic Connectors............... ST
      {trademark of AT&T}; Optional FC
   Loss Budget- 850/1300/1550nm
    15dB.........Multimode @ 62.5/125µm
    20dB..........Single Mode @ 9/125µm

Electrical
     Connector................RJ11 Female
   Max Analog Input 3V p-p
   Analog Interface 600 ohm Isolated 
   Transformer
   Intercom Interface  Capacitor Coupled

System
   Bit Error Rate ........1 in 109 or better
  Audio Indicator.......................Buzzer
Visual Indicators....Power A, Power B
  Alarm, Vcc, Pickup Handset when
 Flashing, Push to Signal Remote Station
 Signaling Control............Push Button

Power
   Standard..............12VDC @ 500mA 
   Optional............24VDC, -48VDC, or 
   ...........115/230VAC with power cube

Temperature
   Operating......................-10° to 50°C
   High Temp (optional)......-20° to 70°C
   Storage.........................-40° to 90°C
   Humidity...........95% non-condensing

Physical (Stand Alone Unit)
    Height.......................(3.53 cm) 1.4"
    Width......................(18.10 cm) 7.1"
    Depth......................(24.80 cm) 9.8"
    Weight.................(831 gm) 2.4 lbs.
 Contact factory for higher requirements

©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment