| |
Fiber Optic Data Communications 
Multiplexers
MODEL LT3006 |
 |
| |
| |
| |
| MODEL
LT3006 |
Gigabit Multimode-to-Single Mode Converter/Repeater |
|
 |
 |
| LT3006S Standalone Unit |
3 X LT3006R (Housed in LTRM192) |
FEATURES
- Data Rates up to 1000Mbps
- Repeats Multimode and Single Mode Signals
- Two-way Communication on One Fiber (optional, single mode only)
- Distances up to 100km
- Local Dry Contact Alarm Relay
- 8 Diagnostic LED Indicators
- Built-In Redundant Power Supply
- Standalone or Rackmount (Interchangeable)
APPLICATIONS
The MAXI Mode Converter is used to convert multimode to single mode, or vice versa, in a variety of LAN environments including Gigabit Ethernet Switches and Routers. This conversion is done to cross-connect different fiber types, regenerate optical signals and/or extend transmission distances. It can also be used to repeat a Gigabit signal on multimode or single mode fibers.
DESCRIPTION
The LT3006 “MAXI” Gigabit Ethernet Multimode-to-Single Mode Fiber Optic Converter converts multimode formats to single mode formats, or vice versa, for Gigabit data transmission. It also repeats the multimode & single mode fiber signals. Transmission distances to more than 100km are possible with the Laser 1550nm option (34dB loss budget).
The MAXI will convert or repeat all popular wavelengths 850/1300nm Multimode or 1300/1550nm Single Mode. It is compatible with Gigabit Ethernet standards 1000Base-SX and 1000Base-LX.
The MAXI provides users with several key features including Local & Remote Loopback, Dry Contact Relay Alarm, Audible Alarm Buzzer, Power Redundancy, and standalone or rackmount modularity.
The Dry Contact Alarm is particularly beneficial. Along with an audible alarm buzzer, it identifies Optical Signal Loss on either the multimode or single mode ends.
Power redundancy is load sharing and switches over automatically in the event of a failure. Power can be either 12VDC (standard), 24VDC, -48VDC, 125VDC or 115/230VAC with an external power cube. Standalone versions are modular, i.e. used either in a standalone case or in a rackmount assembly. Standard connectors are ST, SC or FC type.
Four DIP switches and eight LED indicators are provided to help installation and troubleshooting. A hardened temperature version (-20o to 70oC), Model LT3006T, is also available.
TECHNICAL SPECIFICATIONS |
- Optical:
| Transmitter |
ELED, LASER* |
| Receiver |
PIN Diode |
| Wavelength |
850nm, 1300nm Multimode
1300nm, 1550nm Single Mode |
| Fiber Optic Connectors |
ST, FC or SC |
- Loss Budgets*
| ELED |
Multimode @ 850/1300nm: 16dB |
| LASER (L1) |
Single Mode @ 1300nm: 20dB |
| LASER (L2) |
Single Mode @ 1300nm: 25dB |
| High Power LASER |
Single Mode @ 1300/1550nm: 34dB |
- System:
| Bit Error Rate |
1 in 1010 or better |
- Alarm:
- Visual Indicators:
| System |
PWR A, PWR B, VccA, VccB |
| Optical Signal Status |
MM RX, MM TX, SM RX, SM TX |
- Diagnostic Functions:
Local and Remote Loopback
- Power:
| Standard |
12VDC @ 700mA (max) |
| Optional |
24VDC, -48VDC, or 115/230VAC (with external power cube) |
- Temperature:
| Operating |
-10° to 50°C |
| Hi-Temp (optional) |
-20° to 70°C |
| Storage |
-40° to 90°C |
| Humidity |
95% non-condensing |
- Physical (Standalone/Wallmount Unit):
| Height |
(3.53 cm) 1.4" |
| Width |
(18.14 cm) 7.1" |
| Depth |
(16.57 cm) 6.5" |
| Weight |
(512 gm) 1.5 lbs. |
|
|
|
|
|
|
|
