FIBER OPTIC MODEMS
FIBER OPTIC MULTIPLEXERS
FIBER OPTIC CONVERTERS
FIBER OPTIC REPEATERS
FIBER OPTIC WDM
FIBER OPTIC SPLITTER
FIBER OPTIC CARD CAGE
 

LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Data Communications Modems MODEL LT1630
 
Previous Go to Table of Contents Next
 

MODEL LT1630

T1/E1 (B8ZS/AMI/HDB3) Micro Modem

  • Model LT1630 Distances up to 40 km
  • Local/Remote Loopback
  • Supports AMI/B8ZS/HDB3 Line Codes
  • Eight LED Indicators
  • No Jitter
  • Multimode or Single Mode (850/1300/1550)
  • Low Power Consumption (3 Watts)
  • Full Digital Technology Design
  • 12/24/-48VDC, or 115/230VAC Power
  • High Temperature (-20°C to 70°C) Version Optional

Application

The LT1630 Fiber Optic T1/E1 Modem is typically used to link Channel Banks, PBXs, and M13 multiplexers to DSX-1 Cross Connects in Video Conferencing and Distance Learning applications. It is also used to link Customer Premises Equipment to CSU/DSUs and with metallic medium T1/E1 multiplexers to transmit over fiber optic cable.

Model LT1630 application diagram

Description

The Model LT1630 is a T1/E1 Fiber Optic Modem that offers advanced features such as Jitter Removal, Multiple LEDs and a replaceable Line Interface Module. Because it is based on modern FPGA (Field Programmable Gate Array) technology, it offers optimum flexibility, extremely low current consumptions and high reliability. A rackmount version is available as LT1630R.

Transparent to the framing format, the LT1630 supports AMI, B8ZS and HDB3 line codes and DSX-1 (T1) cross connect distances from 0 to 655 feet. It includes an internal elastic buffer to remove jitter from transmit data.

Eight LED indicators help installation and troubleshooting—one each for POWER, T1/E1, BPV, AIS, ALARM, O-SYNC, RMT1-0, RMTLB. Eight DIP switches, accessible from the panel, provide control settings for line code, line length, local loopback or remote loopback. The intelligent line code setting switch eliminates confusion—such as when the line code does not match the line length setting.

The LT1630 is compatible with all popular types and sizes of optic cable. Fiber optic connectors are ST; FC is optional. Special four-position and two-position feed-thru detachable terminals connect the T1/E1 twisted pairs. Input power is 12VDC, 24VDC, -48VDC or 115/230VAC with an external power cube. An extreme temperature (-20oC to 70oC), LT1630Q is available.

NOTE: The LT1630 is 100% compatible with its predecessor Model LT1620.

Specifications

Data Rates
  T3..................................1.54 Mbps
  E3..................................2.048 Mbps

Optical 
   Transmitter.......................LED/ELED*
   Receiver...........................PIN Diode 
   Wavelength
   .......................1300nm Multimode
   ..........1300nm/1550nm Single Mode
   Fiber Optic Connectors
   ............................. ST, FC Optional
   Loss Budget.............1300/1550nm
   Multimode @ 62.5/125µm........15dB
   Single Mode @ 9/125µm.........20dB

Electrical
   Interface....................T1 or E1 (G.703)
   T1 Connector.............(100 Ohm) Terminal Block
   E1 Connector.............(120 Ohm) Terminal Block
   E1 Connector.............(750 Ohm) Terminal Block
   .................................and BNC (Female) Cable

System
Bit Error Rate 1 in 1010 or better

Visual Indicators
  System Status.........Power Alarm
  T1/E1 Status................ O-Sync, BPV, AIS, T1/E1 OK,
  RMT1-0, RMTLB
Diagnostic Functions Local and Remote Loopback

Power
   Standard.............12VDC @ 250mA 
   Optional..............24 or -48VDC or
   ..........................115/230VAC with power cube

Temperature
   Operating......................-10° to 50°C
   High temp (optional).......-20° to 70°C
   Storage.........................-40° to 90°C
   Humidity..........95% non-condensing

Physical
   Height.......................(2.79 cm) 1.1"
   Width........................(12.70 cm) 5.0"
   Depth........................(6.35 cm) 2.5
   Weight......................(147 gm) 5.2 oz

   Contact factory for higher requirements

©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment