LASCOMM

2009 Dewberry Court, Westlake Village, CA
91361-1810

Phone 805-496-8053
Fax 805-497-3606
Email sales@lascomm.com

Fiber Optic Audio Communication Equipment MODEL LMDXA/B-XA
 
Previous Go to Table of Contents Next
 

MODEL LMDXA/B-XA

2, 4, 6 or 8 Channels of Audio

   

FEATURES

  • Upto 8 Channels of 24 Bit Digitally Encoded Bi-directional Audio Channels over one Fiber
  • Laser Based Systems for Multimode and Singlemode Fiber
  • Surface Mount Technology (SMT) for High Reliability and Repeatability
  • SpectraSmart Network Management Compatible
  • Local LED Status Indicators to Monitor Critical System
    Diagnostics and Performance Parameters
  • ST, FC Optical Connector
  • Hot Swappable Rack Cards
  • Back - Biased Photo Detector Circuitry for Stable
    Optical Laser Output Over Full Temperature Range
  • Meets NEMA TS1 / TS2 & CALTRANS Specifications
  • Utilizes Internal Switching Power Supplies
  • Automatically Resettable Solid-State Current Limiters
    on All Power Lines: Provides Equipment Protection
  • DB 9 Type Connectors for Audio
  • Wide Optical Dynamic Range: Optical Attenuators are Never Needed

DESCRIPTION

The LMDX -A / A series product incorporates a new digital encoding technology. This fiber optic system is available in different configurations ranging from minimum of 2 Channel up to maximum of 8 Channels of Bi-directional Audio signals over one Singlemode or Multimode fiber. Lasacomm’s digital product line incorporates plug-in personality circuit cards to easily configure a wide variety of data channels on this system. The functionality of the LMDXA / A series are further enhanced by its compatibility with Lascomm’s PC based SpectraSmart Network. Management & Diagnostic Software system. SpectraSmart supervises the operating parameters of the transmission system such as the status on Digital carrier detect, voltages, temperatures, optical levels , Laser currents, Digital Power
supply etc. See SpectraSmart brochure for further details.

CONFIGURATIONS

The LMDX- A / A product family is available as rack mount cards suitable for mounting in Meridian card chassis and utilizes 2 card slots. These products can easily be converted to a Standalone module with the SR-1000/S, Desk / Wall mount 2-slot chassis. See SR-1000 brochure for further details.

MARKETS

Security and surveillance
CCTV Networks
Intercomms
Highway Emergency Stations

TECHNICAL SPECIFICATIONS

  • Audio:
    In/Out Impedance 600 Ohms (Bal. / Un Bal.)
    Frequenct Response 10Hz to 20KHz
    SNR >90dB (Weighted) @ 1KHz
    In / Out Level -6 to +6 dBm (4VP-Pmax.)
    Total Harmonic Distortion < 0.01% @ 1 KHz
    Intercom 24 Bit

  • Connectors:
    Audio DB 9F
    Optical ST , FC

  • Enviromental:
    Operating Temperature -34oC to +74oC
    Storage Temperature -55oC to +85oC
    Relative Humidity 0 to 95% Non-condensing

  • Optical:
    Bandwidth 250 Mb/s.
    NOTE: Standard Systems incorporates Fabry Perot Lasers

  • Indicators (LEDs):
    1- Green Power On
    1- Bi-color TX Carrier / Laser Over Current
    1- Bi-color RX Carrier - Present / Error
    1- Bi-color RX Optical Signal - Present/Absent
    1- Green Audio Present ( One Per Channel)
    1- Red Audio Overload (One Per Channel)
    1- Bi-color (Optional) Card Diagnostics

  • Physical:
    Dimensions:  
    Card 160 mm (6.3”) L, 100 mm (4”) W 44mm (1.7”) H
    Weight:  
    Card 450 g (16 oz.)
    Number of Rack Slots Two

  • Quality:
    MTBF >200,000 hours, @ 35oC Ground Fix as per MIL 217F

  • Power:
    Card 8 Watts

  • Model No.:
     
    DXA-2A / 2A-2. . . . . . . . . 2 Ch. Transceiver, 1300 / 850 nm, MM
    DXA-4A / 4A-2. . . . . . . . . 4 Ch. Transceiver, 1300 / 850 nm, MM
    DXA-6A / 6A-2. . . . . . . . . 6 Ch. Transceiver, 1300 / 850 nm, MM
    DXA-8A / 8A-2. . . . . . . . . 8 Ch.Transceiver, 1300 / 850 nm, MM
     
    DXA-2A / 2A-5. . . . . . . . . 2 Ch. Transceiver, 1550 / 1310 nm, SM
    DXA-4A / 4A-5. . . . . . . . . 4 Ch. Transceiver, 1550 / 1310 nm, SM
    DXA-6A / 6A-5. . . . . . . . . 6 Ch. Transceiver, 1550 / 1310 nm, SM
    DXA-8A / 8A-5. . . . . . . . . 8 Ch.Transceiver,1550 / 1310 nm, SM
     
     
    DXB-2A / 2A-2. . . . . . 2 Ch. Transceiver, 850 / 1300 nm, MM
    DXB-4A / 4A-2. . . . . . 4 Ch. Transceiver, 850 / 1300 nm, MM
    DXB-6A / 6A-2. . . . . . 6 Ch. Transceiver, 850 / 1300 nm, MM
    DXB-8A/ 8A-2 . . . . . . 8 Ch.Transceiver, 850 / 1300 nm, MM
     
    DXB-2A / 2A-5. . . . . . 2 Ch. Transceiver, 1310 / 1550 nm, SM
    DXB-4A / 4A-5. . . . . . 4 Ch. Transceiver, 1310 / 1550 nm, SM
    DXB-6A / 6A-5. . . . . . 6 Ch. Transceiver, 1310 / 1550 nm, SM
    DXB-8A / 8A-5. . . . . . 8 Ch.Transceiver, 1310 / 1550 nm, SM
     

OPTICAL

Fiber Type/Size
(um)
Optical Output
(dBm)
Receiver Sensitivity
(dBm)
Optical Budget
(dB)
Wavelength
(nm)
Optical
Connector
Optical Dynamic
Range (dB)
             
Multimode (FP)
62.5 / 125
-4 -24 20 1300 / 850 ST 24
Singlemode (FP)
9 / 125
-4 -24 20 1310 / 1550 ST , FC 24
Singlemode (DFB)
9 / 125
+3 -24 27 1310 / 1550 ST , FC 24


©, Lascomm, 2002-2005
All rights reserved
Home | About Us | Articles | Glossary | Scada Application | Configuration Page
DATA Communication Equipment | Ethernet Communication Equipment
VIDEO Communication Equipment | Phone Extender Communication Equipment
Audio Communication Equipment | SCADA and Multi-Drop Communication Equipment